King Hemp Mini Vape

£19.50

1. Brand name: King Hemp
2. Model: King Hemp Mini Vape
3. Material: Alumuinum
4. Available colors: Black, White, Blue, Beige, Red
5. Size: 1.38″(L) .83″(W) 2.24″(H)
6. Battery Capacity: 650mah
7. Atomizer Resistance: 1.2 ohm
8. Atomizer Capacity: 0.5ml (compatible with most 510 thread .05, .08 & 1.0 ml cartridges)
9. Voltage Ranges: 3.4v – 3.7v – 4.0v
10. Thead: 510
11. Weight: 2.5 ounces

Compatible with most common 510 thread cartridges that are 10.5 mm or less in width.

Clear
SKU: N/A Category:

Description

Packing list:

1 King Hemp Mini Vape mod

1 .05 ml cartridge 510 thread

1 Magnet connection piece

1 USB charging cable

1 King Hemp packaging box

Instructions for use:

Important! – Do not lose the magnet connector attached to the cartridge! It is needed for proper operation of the device.

  1. Power On/Off – To power on press the fire button five times. The fire button will light when the Mini Vape is on. To power off press the fire button five times. The button will not light when the Mini Vape is off.
  2. Preheating: For very thick oil, press the fire button two times, the battery will start to warm up, the voltage is 2.2V, and the preheating time is 15 seconds.
  3. Voltage Adjustment: While the Mini Vape is on, press the fire button three times to adjust between each output voltage;
    Red light is 3.4V
    Blue light is 3.7V
    White light is 4.0V.
  4. Usage: Draw air through the mouth piece while pressing the fire button. After ten seconds of continuous output the Mini Vape will enter power saving mode to prevent damage. If the voltage becomes lower than 3.3V while vaping, the LED light will flash red 10 times indicating that the battery needs to be charged.
  5. Remaining battery display: After vaping and releasing the fire button, the LED light will show the battery level.

White light = 70% – 100% battery power remaining.

Blue light = 40% – 70% battery power remaining.

Red light = 10% – 40% battery power.

Flashing red light = Unit needs to be charged.

  1. Short-circuit protection: When the output resistance is lower 0.4 ohm, the LED will flash white  three times, then stop working.

6. To add oil: Unscrew the atomizers upper cover. Fill the glass tube about 2/3 full. Replace the upper cover.

Supercritical CO2 extraction gives the purest CBD oil.

Additional information

Colour

Black, White, Blue, Beige, Red

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.